StudentShare
Contact Us
Sign In / Sign Up for FREE
Search
Go to advanced search...
Free

IR Spectroscopy determination of xylene using an internal standard - Essay Example

Cite this document
Summary
We used a Fourier transform infrared spectrometer to analyze eleven solutions: O-xylene, p-xylene, 3 concentrations of p-xylene in cyclohexane, 3 concentrations of m-xylene in cyclohexane, and 2 unknown samples. We analyzed our samples using o-xylene as our standard to determine…
Download full paper File format: .doc, available for editing
GRAB THE BEST PAPER96.3% of users find it useful
IR Spectroscopy determination of xylene using an internal standard
Read Text Preview

Extract of sample "IR Spectroscopy determination of xylene using an internal standard"

We used a Fourier transform infrared spectrometer to analyze eleven solutions: O-xylene, p-xylene, 3 concentrations of p-xylene in cyclohexane, 3 concentrations of m-xylene in cyclohexane, and 2 unknown samples. We analyzed our samples using o-xylene as our standard to determine the concentrations of m-xylene and p-xylene in our unknown samples. Standard curves were constructed from the ratio of absorbance of characteristic peaks. A trend line showing the least square fit helped to determine the ratio of concentrations in our unknown sample.

The results obtained show that the concentration of m-xylene and p-xylene can be determined if their concentrations in the stock solution are determined. This will be used to show the various concentrations of the m-xylene and p-xylene in the unknown sample.IntroductionInfrared spectroscopy is the spectroscopy that uses the infrared region of the electromagnetic spectrum, which is a region of lower wavelength than visible light, exciting molecules to higher vibrational states in order to detect energy of the vibrational modes in your sample.

The infra-red radiation is passed through a sample by an infra-red spectrometer which uses a detector to represent the transmission in graphical representations. Infra-red spectroscopy can be used to study virtually every sample in any state of matter and the IR spectrometer utilizes FTIR spectroscopy which has improved the infrared spectra quality within a short time of analysis. This technique has been in existence since 1940’s where the instruments relied on prisms as the elements to disperse the radiations but further development has occurred which include the diffraction gratings and finally the most significant the use of interferometers and Fourier-transformation mathematical process.

Infrared spectroscopy can be used a number of ways, one of which is based on absorption spectroscopy. Isomers of organic molecules display a unique vibrational frequency; thus by analyzing a specific region of the spectrum, overlaying pure and different concentrations of a sample molecule as well as any background spectra it is possible to determine the concentration of an unknown sampleConclusionFrom the results the concentration of p-xylene and m-xylene in the two samples was determine using the Fourier transform infrared spectrometer using the internal standards.

It was observed it is possible to calculate the exact concentration of both p-xylene and m-xylene in the samples if the exact concentration of the stock solution used is known. This determines their concentration in the samples being tested.ReferencesSkoog, Douglas A., F. James. Holler and Stanley R. Crouch. Principles of instrumental analysis; Belmont, C A: Thomson Brooks/Cole, 2007.

Read More
Cite this document
  • APA
  • MLA
  • CHICAGO
(“IR Spectroscopy determination of xylene using an internal standard Essay”, n.d.)
Retrieved from https://studentshare.org/chemistry/1690759-ir-spectroscopy-determination-of-xylene-using-an-internal-standard
(IR Spectroscopy Determination of Xylene Using an Internal Standard Essay)
https://studentshare.org/chemistry/1690759-ir-spectroscopy-determination-of-xylene-using-an-internal-standard.
“IR Spectroscopy Determination of Xylene Using an Internal Standard Essay”, n.d. https://studentshare.org/chemistry/1690759-ir-spectroscopy-determination-of-xylene-using-an-internal-standard.
  • Cited: 6 times

CHECK THESE SAMPLES OF IR Spectroscopy determination of xylene using an internal standard

History of analytical techniques used in structure determination

The main advantage of using neutron beam is that all nuclei are of similar size and all can be found with comparable accuracy.... Structure determination is a most important field that covers all branches of chemistry.... The structural determination of protein is difficult by method because Crystallography requires purified protein in fairly large amount and it requires protein in form of a crystal and every protein can't be crystallized....
5 Pages (1250 words) Essay

Determining Nitrous Oxide Content in Gases

The paper is a comparative review of a few of the methods used in determination of nitrous oxide in gases.... Besides the potential for leakage is higher and leak checks using the soap bubble technique have to be performed.... Nitrous oxide, popularly known as the laughing gas has been used in medicine as an anaesthetic since the late 18th century and also misused for recreational purposes....
5 Pages (1250 words) Essay

Fully discuss absortion and emission spectroscopy follows instruction below

The standard graph showing concentration against percentage intensity is then determined.... Atomic emission spectroscopy and atomic absorption spectroscopy are analytical techniques used to determine presence and concentration of certain elements in a laboratory samples.... Atomic emission spectroscopy utilizes an instrument called atomic emission spectrometer or flame… Basically, the flame is used to atomize the sample so that radiation emitted is measured....
2 Pages (500 words) Assignment

Raman Spectroscopy of Toluene and Fluorescence Spectroscopy of Rhodamine 6G

Toluene (methylbenzene) has a CH3 group attached to the benzene ring, for ir spectroscopy, the CH3 group exists at just below 1500 cm-1.... Raman spectroscopy involves the… However, photon that is incident is of much greater energy than the quantum energy in the vibrational mode.... This loses its energy to the molecular vibration with the remaining energy being scattered as a photon with reduced a In Raman spectroscopy, light and matter interacts....
4 Pages (1000 words) Lab Report

Fourier Transform Infrared Spectroscopy

Functional groups give significant peaks at particular regions of the frequency range or wavenumber thus providing information on the chemical properties… Positional isomers of xylene were scanned and concentration of the unknown was linearly determined through the obtained peak responses. Fourier Transform Infrared (FTIR) is an analytical technique used primarily to identify compounds based on the Different bonds in the molecule of these compounds give respective frequencies which are referred to as the wavenumber (Skoog 2007)....
8 Pages (2000 words) Lab Report

Absorption Spectroscopy

A sample of the water with the dye was analyzed using absorption spectroscopy.... It was found that… Comparing it with the LD50 (6-10g/kg body weight), it was found that the level of Allura Red dye in the water is within normal levels. Absorption spectroscopy is an important analytical tool that is It is valuable since it can accurately determine very tiny analyte concentrations (to the range of up to 10-5).... This will be accomplished by determining the concentration of the dye present in the sample by use of absorption spectroscopy and then comparing it with the measured LD50 of that dye....
4 Pages (1000 words) Lab Report

Spectroscopy

This is caused by emission of electric charges from excited atoms.... This spectrum of colors produced consists of different waves of varying wavelength and velocity. It was found that the experimental values… According to Lardan H.... understanding ‘Series of waves converges to series limit at an air wavelength of 364....
3 Pages (750 words) Lab Report

Tasks in Chemistry

Use the data presented in the following three tables to answer the questions below:(g) Use the internal standard Calibration Method to calculate the concentration of caffeine in each of the three samples.... This paper outlines the parameters that gave rise to the separation, using the HPLC simulation software, data collected over two days from an HPLC analysis.... hellip; using the HPLC simulation software currently available in the practical folder on Blackboard find the optimum parameters to effect separation of the following mixture of compounds using the Agilent Zorbax column as the stationary phase: acetophenone, p-chlorophenol, benzonitrile, p-xylene, p-dichlorobenzene, ethylbenzene, bromobenzene, toluene, and n-butylbenzene....
5 Pages (1250 words) Assignment
sponsored ads
We use cookies to create the best experience for you. Keep on browsing if you are OK with that, or find out how to manage cookies.
Contact Us